Frequently Asked Questions
-
Has Farm Alarm been used for both domestic and commercial applications? Click here...
-
Can Farm Alarm activate other devices e.g. lights? Click here...
-
Will Farm Alarm interfere with other equipment using wireless signals? Click here...
-
Can more then one receiver be used e.g. in a large house or separate building? Click here...
-
When using multiple transmitters to cover different areas, does the same type of transmitter have to be used? Click here...
Q. Has Farm Alarm been used for both domestic and commercial applications?
A.
Yes. Farm Alarm has been very successful in helping to
protect commercial warehouses and remote entries, also domestic
buildings which house valuable items i.e. motor cycle, boat, tools
etc. In addition Farm Alarm also offers extra piece of mind for
when you are at home, by being alerted to friend of foe before they
are on your door step.
Back to top
?
Q. Can Farm Alarm activate other devices e.g lights?
A.
Yes, the Farm Alarm WR-1000 Receiver can be hard wired
through a relay to activate almost any electrical device including
existing security lighting and strobes. This is especially invaluable
if you are not home and an intruder enters your front gate, lights can
be activated around your home immediately. If you are only relying on
security lighting, the intruder has made their way right to your front
door before being deterred.
Back to top
?
Q. Will Farm Alarm interfere with other equipment using wireless signals?
A.
Highly unlikely, as the product has been designed with
256 combinations in the frequency range to avoid interference.
Back to top
?
Q. Can more then one receiver be used e.g. in a large house or separate building?
A.
Yes extra receivers can be used in different locations
and can each be programmed to sound a different/or same sound at the
same time in response to the one transmitter.
Back to top
?
Q. When using multiple transmitters to cover different areas, does the same type of transmitter have to be used?
A.
No, up to four transmitters can be used to signal the
one receiver and any combination of the three models can be chosen for
the different locations. Extra transmitters and receivers can be added
to create a unique system for any application.
Back to top
?